Supply
Incoming QC
Tests run on every lot at intake — across every material class. Primary and secondary metrics adapt by material type. Results feed supplier quality scores and block low-grade material from entering formulation.
Pass rate (30d)
91%
10 of 11 passed
Tests this week
11
Across all materials
Contamination flags
1
Lots quarantined
Materials audited
4
Sawdust, lignin, NC, additives
| QC ID | Material | Lot | Performed | Analyst | Primary metric | Secondary | Contamination | Result |
|---|---|---|---|---|---|---|---|---|
| QC-4018 | Sawdust | LOT-2604-018 | 2026-04-17 | M. Torres | 8.2% Moisture | 0.42 Particle σ | None | Pass |
| QC-4017 | Sawdust | LOT-2604-017 | 2026-04-18 | J. Park | 9.4% Moisture | 0.31 Particle σ | None | Pass |
| QC-4014 | Sawdust | LOT-2604-014 | 2026-04-11 | J. Park | 12.4% Moisture | 0.72 Particle σ | Flagged | Fail |
| QC-5042 | Lignin | LOT-LIG-0042 | 2026-04-14 | R. Chen | 96.4% Purity | 0.8% Ash | None | Pass |
| QC-5041 | Lignin | LOT-LIG-0041 | 2026-04-09 | R. Chen | 93.1% Purity | 1.4% Ash | None | Pass |
| QC-6021 | Nanocellulose | LOT-NC-0021 | 2026-04-12 | R. Chen | 90% Solids | 22 Aspect ratio | None | Pass |
| QC-6020 | Nanocellulose | LOT-NC-0020 | 2026-04-08 | J. Park | 3.2% Solids | 120 Aspect ratio | None | Pass |
| QC-6018 | Nanocellulose | LOT-NC-0018 | 2026-03-22 | R. Chen | 2.1% Solids | 150 Aspect ratio | Minor | Pass |
| QC-7108 | Additive | LOT-ADD-0108 | 2026-04-16 | M. Torres | 52% Conc. | 820 cP Viscosity | None | Pass |
| QC-7107 | Additive | LOT-ADD-0107 | 2026-04-10 | M. Torres | 48% Conc. | 640 cP Viscosity | None | Pass |
| QC-7106 | Additive | LOT-ADD-0106 | 2026-04-02 | J. Park | 99% Purity | 1.2 μm D50 size | None | Pass |